Canoga-perkins 9145ELB NID Software Version 4.01 User Manual

EdgeAccess 9145ELB NID Software Version 4.01User’s Manual

9145ELB NID Software User’s Manualviii• Chapter 11, Bandwidth Profiles describes 9145ELB bandwidth profiling. Contacting Technical SupportContact Cano

9145ELB NID Software User’s Manual CoS Configuration9145ELB Queuing Functionality90Figure 9-1 CoS Functional ModelThe 9145ELB has a set of egress que

CoS Configuration 9145ELB NID Software User’s Manual9145ELB Queuing Functionality 91Figure 9-2 System View of CoS FunctionsThere is a single set of c

9145ELB NID Software User’s Manual CoS ConfigurationCoS Support929.2 CoS SupportTo begin configuring Class of Service, from the Main Menu, select CoS

CoS Configuration 9145ELB NID Software User’s ManualCoS Queues Configuration 939.3 CoS Queues ConfigurationThe Class of Service Queues Configuration

9145ELB NID Software User’s Manual CoS ConfigurationCoS Queues Configuration94Note that: • All User Ports share the same PCP to queue classification.

CoS Configuration 9145ELB NID Software User’s ManualCoS Queues Configuration 95Figure 9-6 User Port Tagged Packet Classifier Mapping (PCP Mode) scree

9145ELB NID Software User’s Manual CoS ConfigurationCoS Queues Configuration96NOTE: Mapping a queue on the User Port in C-VID mode is configured from

CoS Configuration 9145ELB NID Software User’s ManualCoS Queues Configuration 97• If you selected AFEF in step 2, Figure 9-11 opens. See the section “A

9145ELB NID Software User’s Manual CoS ConfigurationCoS Queues Configuration984. Press Esc to return to the User Port Untagged Packet Classifier Confi

CoS Configuration 9145ELB NID Software User’s ManualCoS Queues Configuration 994. Press Esc to return to the User Port Untagged Packet Classifier Conf

Introduction 9145ELB NID Software User’s ManualManagement Access1Chapter 1 Introduction1.0 About the 9145ELB SoftwareThe 9145ELB is a Multiport Netwo

9145ELB NID Software User’s Manual CoS ConfigurationCoS Queues Configuration1003. Scheduling Scheme The 9145ELB supports two scheduling modes: Strict

CoS Configuration 9145ELB NID Software User’s ManualCoS Queues Configuration 1019.3.4 Queues Configuration on Network PortsThe same queue configurati

9145ELB NID Software User’s Manual CoS ConfigurationCoS Queues Configuration1026. Enable/Disable (ED) Drop Profile Note that this option is Disabled

CoS Configuration 9145ELB NID Software User’s ManualQueue Statistics 1039.4 Queue StatisticsThe Queue Statistics screen display will depend on your q

9145ELB NID Software User’s Manual CoS ConfigurationQueue Statistics104

Configuring EVC 9145ELB NID Software User’s ManualEVC Functionality105Chapter 10Configuring EVC 10.0 Introduction The 9145ELB supports VLAN multiplex

9145ELB NID Software User’s Manual Configuring EVCEVC Functionality106• An EVC record can contain only C-VLANs from a single User Port. EVC records do

Configuring EVC 9145ELB NID Software User’s ManualEVC Functionality 107• Number of transmitted frames and bytes on the Network Port• Number of receive

9145ELB NID Software User’s Manual Configuring EVCEVC Functionality108Figure 10-1 EVC menu hierarchy EVC Configuration MenuEVC Record ListCre

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 10910.2 EVC ConfigurationNOTE: EVC Configuration Records options replace the VLA

9145ELB NID Software User’s Manual IntroductionManagement Security Features21.2 Management Security FeaturesThe 9145ELB has comprehensive management

9145ELB NID Software User’s Manual Configuring EVCEVC Configuration11010.2.1 Create an EVC Record1. On the EVC Configuration screen (Figure 10-2), ty

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 11111. In the Tunnel VLAN field, press the Space bar to enable or disable Tunnel V

9145ELB NID Software User’s Manual Configuring EVCEVC Configuration11210.2.3 Modify an EVC record1. On the EVC Record List screen (Figure 10-3), typ

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 113Figure 10-6 Modify EVC Configuration screen (All-to-One)3. To change the Admin

9145ELB NID Software User’s Manual Configuring EVCEVC Configuration114• To set a policing level, type 1 and press Enter. Press the Space bar to select

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 115ID are the values of the VLAN ID in the frames received on the User Ports. Do n

9145ELB NID Software User’s Manual Configuring EVCEVC Configuration116Figure 10-9 C-VLAN to S-Tag PCP Map screen13. To specify CVID PCP translation r

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 117Figure 10-10 P-Bit Translation Table screen14. To modify CVID to T-Tag PCP Map

9145ELB NID Software User’s Manual Configuring EVCEVC Configuration118Figure 10-11 C-VLAN to T-Tag PCP Map screen15. Press Esc to return to the EVC R

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 119Figure 10-12 EVC Record C-VLAN List screen10.2.3.2 Mapping a Queue on the User

Introduction 9145ELB NID Software User’s ManualFeature Access Level Configuration 31.4 Feature Access Level ConfigurationThe 9145ELB has a default as

9145ELB NID Software User’s Manual Configuring EVCEVC Configuration120• Enter a C-VLAN ID (C-VID) and press Enter. The screen displays a page of 40 C-

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 121.Figure 10-14 EVC Record Statistics (Current) screenFigure 10-15 EVC Record

9145ELB NID Software User’s Manual Configuring EVCEVC Configuration122Figure 10-16 C-VLAN Level Statistics screen Canoga Perkins Corp. Ethernet 1G/

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 12310.2.5 S-TPID/T-TPID ConfigurationS-TPID and T-TPID are configured at the syst

Configuring EVC 9145ELB NID Software User’s ManualEVC Configuration 124

Bandwidth Profiles 9145ELB NID Software User’s ManualBandwidth Profiles125Chapter 11Bandwidth Profiles This chapter describes the Ethernet Traffic eng

9145ELB NID Software User’s Manual Bandwidth ProfilesBandwidth Profiles126• Excess Information Parameters:• Excess Information Rate (EIR) is expressed

Bandwidth Profiles 9145ELB NID Software User’s ManualPolicers 127 Figure 11-1 Bandwidth Profiling AlgorithmWhen a packet is received of size B bytes

9145ELB NID Software User’s Manual Bandwidth ProfilesShapers128• A User Port - If a policer is associated with a User Port, no other policers (service

Bandwidth Profiles 9145ELB NID Software User’s ManualShapers 129The double-rate shaping algorithm specifies six parameters:• CIR: The shaping rate for

9145ELB NID Software User’s Manual IntroductionTerminology4MP Maintenance PointNID Network Interface DeviceNPA Network Performance AssuranceOAM Operat

9145ELB NID Software User’s Manual Bandwidth ProfilesQueue size and yellow packet thresholds13011.3.1 Shaper statisticsShaper related statistics are

Bandwidth Profiles 9145ELB NID Software User’s ManualConfiguring Bandwidth Profiles 13111.5 Configuring Bandwidth ProfilesUse the following steps to

9145ELB NID Software User’s Manual Bandwidth ProfilesConfiguring Bandwidth Profiles1329. Type A to accept the Policer profile values. If any of the v

Bandwidth Profiles 9145ELB NID Software User’s ManualConfiguring Bandwidth Profiles 133Figure 11-5 Create a New Bandwidth Profile screen (with Police

9145ELB NID Software User’s Manual Bandwidth ProfilesConfiguring Bandwidth Profiles134Figure 11-6 Modify Bandwidth Profile screen (with Shaper profil

Bandwidth Profiles 9145ELB NID Software User’s ManualUser to Network Ingress Policers 13511.6 User to Network Ingress PolicersFor steps for configuri

9145ELB NID Software User’s Manual Bandwidth ProfilesUser to Network Ingress Policers136Figure 11-8 Modify a Policer screen3. To change the Administr

Bandwidth Profiles 9145ELB NID Software User’s ManualUser to Network Ingress Policers 13711.6.2 Viewing Policer Statistics1. On the Bandwidth Profile

9145ELB NID Software User’s Manual Bandwidth ProfilesUser to Network Egress Shapers13811.7 User to Network Egress ShapersYou can view and edit user t

Bandwidth Profiles 9145ELB NID Software User’s ManualUser to Network Egress Shapers 139Figure 11-11 Egress Shapers Configuration screen Canoga Perkin

Getting Started 9145ELB NID Software User’s Manual5Chapter 2Getting Started2.0 Configuring Terminal ManagementWhen you use the EIA-232 Serial Port fo

Bandwidth Profiles 9145ELB NID Software User’s ManualUser to Network Egress Shapers 140

CANOGA PERKINS CORPORATION20600 Prairie StreetChatsworth, California 913116008 USAPhone: (818) 7186300 FAX: (818) 7186312Web Site: www.canoga.c

9145ELB NID Software User’s Manual Getting StartedSetting Up SNMP Network Management62.1 Setting Up SNMP Network ManagementThe 9145ELB communicates w

Getting Started 9145ELB NID Software User’s ManualLogin 7Figure 2-1 Screen Format2.3 LoginThe first screen is the Login screen (Figure 2-2). Type yo

9145ELB NID Software User’s Manual Getting StartedMain Menu8Figure 2-2 Login screenWhen you successfully log in, the Main Menu (Figure 2-3) appears.

Getting Started 9145ELB NID Software User’s ManualMain Menu 9Figure 2-3 Main Menu 7. Software Upgrade The Software Upgrade screen is used to download

NOTICECanoga Perkins has prepared this user’s manual for use by customers and Canoga Perkins personnel as a guide for the proper installation, operati

9145ELB NID Software User’s Manual Getting StartedSupported MIBs102.5 Supported MIBsThis section lists all supported MIBs including Standard MIBs and

System Configuration 9145ELB NID Software User’s Manual11Chapter 3System Configuration3.0 System Configuration MenuThe System Configuration menu (Fig

9145ELB NID Software User’s Manual System Configuration12Figure 3-2 Logical Model for a NIDThe forwarding plane is responsible for processing service

System Configuration 9145ELB NID Software User’s Manual 13Figure 3-3 Typical Application of the Control Plane EntitiesFigure 3-3 shows how these diff

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration14messages. If there is no reply from the CE, the Service Provider

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 15• Untagged (default): Management PDUs are transported without a

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration16Figure 3-5 Management IP Configuration screen7. Test IP Address

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 173.1.2 Auxiliary IP ConfigurationOn the IP/SNMP Agent Configurati

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration18Options are: Untagged, S-Tagged, S-C (double) Tagged, S-T (tunnel)

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 193.1.3 Host TableOn the IP/SNMP Agent Configuration screen (Figur

9145ELB NID Software User’s ManualiChapter 1. Introduction ... 1About the 91

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration203. To change Telnet Access, type 1 and press Enter. Press the Spac

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 213.1.4 Trap TableOn the IP/SNMP Agent Configuration screen (Figur

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration22NOTE: Each Notification Type has a different set of parameters ass

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 23Figure 3-12 Edit Trap/Notification Type screen 4. Select the Not

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration24Figure 3-13 V1-Trap or V2c-Trap Notification Type Parameter scree

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 25Figure 3-14 V2c-Inform Notification Type Parameter screenFigure

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration264. If you select V3-Inform (Figure 3-17):a. Type the Security Nam

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 273.1.4.2 Delete a Trap Table Entry1. To delete a Managing Host IP

9145ELB NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration28The System Log contains the log of all enabled Trap events. 1. To

System Configuration 9145ELB NID Software User’s ManualIP/SNMP Agent Configuration 293. Press Enter to close the editing function and then press Esc t

9145ELB NID Software User’s ManualiiChapter 3. System Configuration... 11System Configuration

9145ELB NID Software User’s Manual System ConfigurationSecurity Configuration303.2 Security ConfigurationThe 9145ELB can be configured for Strong pas

System Configuration 9145ELB NID Software User’s ManualSecurity Configuration 315. Maximum Consecutive Character Types The number of alpha, numeric,

9145ELB NID Software User’s Manual System ConfigurationAccount Configuration323.3 Account ConfigurationUse the Account Configuration screen to add ne

System Configuration 9145ELB NID Software User’s ManualAccount Configuration 333.3.1 Three Levels of SecurityA three-level security system on the 914

9145ELB NID Software User’s Manual System ConfigurationAccount Configuration34Figure 3-20 Edit User Account screenUsername The name of the new accou

System Configuration 9145ELB NID Software User’s ManualAccount Configuration 358. Allow UI Logout Of User Gives Supervisors the ability to log users

9145ELB NID Software User’s Manual System ConfigurationSystem Information363.4 System InformationThe System Information screen is used to add or edit

System Configuration 9145ELB NID Software User’s ManualRADIUS Client 373. Location Maximum of 25 characters.4. Customer Maximum of 25 characters.5.

9145ELB NID Software User’s Manual System ConfigurationRADIUS Client38server with 20 have higher priority simply by changing its priority to 5; no nee

System Configuration 9145ELB NID Software User’s ManualSNTP Client Configuration 39Figure 3-22 RADIUS Client Configuration screen3.6 SNTP Client Con

9145ELB NID Software User’s Manual iiiLoopback Setup ...

9145ELB NID Software User’s Manual System ConfigurationSNTP Client Configuration402. SNTP Client Observe DST Enables/Disables Daylight Savings Time (S

System Configuration 9145ELB NID Software User’s ManualSYSLOG Client Configuration 413.7 SYSLOG Client ConfigurationUse the SYSLOG Client Configurati

9145ELB NID Software User’s Manual System ConfigurationHardware Information423.8 Hardware InformationThe Hardware Information screen displays the mod

System Configuration 9145ELB NID Software User’s ManualHardware Information 43Figure 3-26 Hardware Information screen - 2 of 6Selecting Next or Prev

9145ELB NID Software User’s Manual System ConfigurationHardware Information44

Diagnostics 9145ELB NID Software User’s Manual45Chapter 4Diagnostics4.0 Diagnostic FunctionsFrom the Main Menu (Figure 2-3), select (2) Diagnostics m

9145ELB NID Software User’s Manual DiagnosticsLoopback Setup464.1 Loopback Setup The Loopback Setup screen is used to configure and initiate loopback

Diagnostics 9145ELB NID Software User’s ManualLoopback Setup 47 Figure 4-3 Ethernet Loopback Setup screen1. To select a port, type 1 and press Enter

9145ELB NID Software User’s Manual DiagnosticsLatency/Jitter Test484.2 Latency/Jitter TestThe Latency/Jitter Test screen is used to initiate tests th

Diagnostics 9145ELB NID Software User’s ManualLatency/Jitter Test 49Local PBit Rcvd The priority as it was received at the end of the Round Trip.Far E

9145ELB NID Software User’s ManualivReset Configuration To Default... 78Cha

9145ELB NID Software User’s Manual DiagnosticsLatency/Jitter Test50used. Any address can be used with the Manager IP since it has access to the Defaul

Diagnostics 9145ELB NID Software User’s ManualPING Generation 514.3 PING GenerationThe PING Generation screen (also available from the Utility menu)

9145ELB NID Software User’s Manual DiagnosticsPING Generation526. To enter the Ping S-VLAN ID, type 6 and press Enter. You can configure this setting

Diagnostics 9145ELB NID Software User’s ManualCable Diagnostics 534.4 Cable DiagnosticsThe cable diagnostics function provides UTP cable testing. Its

9145ELB NID Software User’s Manual DiagnosticsCable Diagnostics54

Port Information 9145ELB NID Software User’s Manual55Chapter 5Port Information5.0 Port DescriptionThe Port Information screen (Figure 5-1) provides a

9145ELB NID Software User’s Manual Port InformationLink Status565.1 Link Status Link Status informs you of the current link status of the User, Netwo

Port Information 9145ELB NID Software User’s ManualPort Configuration 575.2 Port ConfigurationUse the Port Configuration functions to obtain hardware

9145ELB NID Software User’s Manual Port InformationPort Configuration585.2.1 Hardware Information The Hardware Information screen (Figure 5-4) provid

Port Information 9145ELB NID Software User’s ManualPort Configuration 595.2.2 Port Config/Status ScreensFrom the Port Configuration screen (Figure 5-

9145ELB NID Software User’s Manual vDifferentiated Service Code Point (DSCP) Mode ... 97Assured Forwarding (AF)

9145ELB NID Software User’s Manual Port InformationPort Configuration60Figure 5-6 10G2 Config/Status screen (Network Port)When 10G2 is configured as

Port Information 9145ELB NID Software User’s ManualPort Configuration 61 The settings are listed below: RMTF Enables or disables remote fault config

9145ELB NID Software User’s Manual Port InformationPort Configuration623. To go to a particular port, type G and press Enter. You are prompted to ente

Port Information 9145ELB NID Software User’s ManualNetwork Side Forwarding Configuration 635.3 Network Side Forwarding ConfigurationFrom the Port Inf

9145ELB NID Software User’s Manual Port InformationNetwork Side Forwarding Configuration64Figure 5-11 Network Side Forwarding Configuration screen (e

Port Information 9145ELB NID Software User’s ManualLayer 2 Statistics 655.4 Layer 2 StatisticsTo view Layer 2 statistics, from the Port Information s

9145ELB NID Software User’s Manual Port InformationLayer 2 Statistics66Frame Counters Type F and press Enter to view. (Available on Layer 2 Error Sta

Port Information 9145ELB NID Software User’s ManualLayer 2 Statistics 675.4.1 Layer 2 Counter Definitions The following are definitions of the counte

9145ELB NID Software User’s Manual Port InformationLayer 2 Statistics68Oversize > MaxFrameSize The number of frames received on the interface that

Port Information 9145ELB NID Software User’s ManualRMON Group 1 Statistics 695.5 RMON Group 1 StatisticsTo view Remote Monitoring Specification (RMON

9145ELB NID Software User’s ManualviShaper statistics...

9145ELB NID Software User’s Manual Port InformationRMON Group 1 Statistics70Multicasts Rcvd Reports the total number of good packets received that we

Port Information 9145ELB NID Software User’s ManualRMON Group 1 Statistics 71Figure 5-16 RMON Group 1 Statistics screen (continued) Canoga Perkins Co

9145ELB NID Software User’s Manual Port InformationRMON Group 1 Statistics72

System Alarms & Logs 9145ELB NID Software User’s Manual73Chapter 6System Alarms & Logs6.0 System AlarmsUse the System Alarms screen to view

9145ELB NID Software User’s Manual System Alarms & LogsSystem Log746.1 System LogThe System Log lists all events that occurred since the last pow

System Alarms & Logs 9145ELB NID Software User’s ManualSystem Log 756.1.1 Log Display Filter ConfigurationThe 9145ELB has a flexible System Log

9145ELB NID Software User’s Manual System Alarms & LogsSystem Log76

Utilities 9145ELB NID Software User’s Manual77Chapter 7Utilities7.0 Utilities MenuUse the Utilities Menu to setup and display basic information. From

9145ELB NID Software User’s Manual UtilitiesSet Date and Time787.1 Set Date and TimeTo set the correct date and time, type 1 and press Enter. Type th

Utilities 9145ELB NID Software User’s ManualVT100 Baud Rate 797.4 VT100 Baud RateTo change the VT100 baud rate, from the Utilities Menu, type 4 and p

9145ELB NID Software User’s ManualviiPrefaceAbout this ManualThis manual provides instructions on the configuration and operation of the 9145ELB Netwo

9145ELB NID Software User’s Manual UtilitiesStatic ARP Table807.6 Static ARP TableThe Static ARP table is used to define mapping between IP address a

Utilities 9145ELB NID Software User’s ManualDynamic ARP Table 817.7 Dynamic ARP TableThe Dynamic ARP table lists currently active IP and MAC addresse

9145ELB NID Software User’s Manual UtilitiesDynamic ARP Table82

Software Upgrade 9145ELB NID Software User’s ManualSoftware Reset83Chapter 8Software Upgrade8.0 Flash MemoryCAUTION: Swap Bank and Software Reset or

9145ELB NID Software User’s Manual Software UpgradeSwap Bank After Download and Reset84NOTE: All users will be logged off during the 9145ELB reset. In

Software Upgrade 9145ELB NID Software User’s ManualGet Software Upgrades with TFTP 858.4 Get Software Upgrades with TFTPSoftware can be downloaded fr

9145ELB NID Software User’s Manual Software UpgradeSoftware Upgrades Using FTP or SFTP868.5 Software Upgrades Using FTP or SFTP8.5.1 Software Downlo

Software Upgrade 9145ELB NID Software User’s ManualSoftware Upgrades Using FTP or SFTP 87Where IP address is the management IP address for the 9145ELB

9145ELB NID Software User’s Manual Software UpgradeSoftware Upgrades Using FTP or SFTP888.5.3 Hardware ResetA hardware reset clears all memory. Traff

CoS Configuration 9145ELB NID Software User’s Manual9145ELB Queuing Functionality89Chapter 9CoS Configuration9.0 Class of Service CAUTION: When CoS S