Canoga-perkins 9145EMP NID Software Version 3.1 User Manual

EdgeAccess 9145EMP NID Software Version 3.1 User’s Manual

9145E NID Software User’s Manualviii The World Leader in Fiber Optic Communications Systems

9145EMP NID Software User’s Manual Software UpgradeSwap Bank After Download and Reset88NOTE: All users will be logged off during the 9145EMP reset. In

Software Upgrade 9145EMP NID Software User’s ManualGet Software Upgrades with TFTP 898.4 Get Software Upgrades with TFTPSoftware can be downloaded fr

9145EMP NID Software User’s Manual Software UpgradeSoftware Upgrades Using FTP or SFTP908.5 Software Upgrades Using FTP or SFTP8.5.1 Software Downlo

Software Upgrade 9145EMP NID Software User’s ManualSoftware Upgrades Using FTP or SFTP918. Type your 9145EMP account user name and press Enter. 9. Typ

9145EMP NID Software User’s Manual Software UpgradeSoftware Upgrades Using FTP or SFTP92

Link OAM 9145EMP NID Software User’s Manual939.0 Operation, Administration and MaintenanceOperation, Administration, and Maintenance (OAM) is defined

9145EMP NID Software User’s Manual Link OAMOAM Control949.1 OAM ControlFrom the Link OAM screen, select OAM Control (1) and press Enter. The OAM Cont

Link OAM 9145EMP NID Software User’s ManualOAM Control 95Link Fault If the link has detected a fault and is transmitting OAMPDUs with a link fault in

9145EMP NID Software User’s Manual Link OAMOAM Control969.1.6 OAM Remote Fault This setting indicates whether a remote fault OAM PDU was sent by th

Link OAM 9145EMP NID Software User’s ManualOAM Peer Information 979.2 OAM Peer InformationThe OAM Peer Information screen (Figure 9-3) displays infor

9145EMP NID Software User’s ManualixAbout this ManualThis manual provides instructions on the configuration and operation of the 9145EMP Network Inter

9145EMP NID Software User’s Manual Link OAMOAM Statistics989.3 OAM StatisticsThe OAM Statistics screens display information about OAMPDUs, Event Noti

Link OAM 9145EMP NID Software User’s ManualOAM Event Configuration 999.4 OAM Event ConfigurationTo configure errors in the OAM, from the Link OAM scr

9145EMP NID Software User’s Manual Link OAMOAM Event Log1009.5 OAM Event LogThe OAM Event Log Brief Display screen displays only OAM entries. From th

Link OAM 9145EMP NID Software User’s ManualOAM Event Log1019.5.1 Event Log Detail Display On the OAM Event Log Brief Display screen (Figure 9-6), typ

9145EMP NID Software User’s Manual Link OAMOAM Event Log102Figure 9-8 Display Filter Configuration screen Canoga Perkins Corp. Ethernet Netw

CoS Configuration 9145EMP NID Software User’s ManualQueues on the 9145EMP10310.0 Class of Service CAUTION: When CoS Support settings are set to Enabl

9145EMP NID Software User’s Manual CoS ConfigurationQueues on the 9145EMP104Figure 10-1 9145EMP QueuesUser 1 QueuesUser 2 QueuesUser 3 QueuesUser 4 Q

CoS Configuration 9145EMP NID Software User’s ManualCoS Support 10510.2 CoS SupportTo begin configuring Class of Service, from the Main Menu, select

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration10610.3 CoS Queues ConfigurationThe Class of Service Queues Configuration

CoS Configuration 9145EMP NID Software User’s ManualCoS Queues Configuration 107Each port has a separate set of four queues (see Figure 10-1).To confi

9145EMP NID Software User’s Manualx• Chapter 11, Service OAM describes how to detect, isolate, and report connectivity faults that span networks compr

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration108can be selected. To enable or disable a queue, see “Queues Configurati

CoS Configuration 9145EMP NID Software User’s ManualCoS Queues Configuration 109To enable or disable a queue, see “Queues Configuration on Network Por

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration1104. To return to the Tagged Packet Classifier Configuration screen, pres

CoS Configuration 9145EMP NID Software User’s ManualCoS Queues Configuration 11110.3.2 Untagged Packet Classifier MappingUntagged packet classifier m

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration11210.3.2.1 IP Precedence ModeOn the User Port Untagged Packet Classifier

CoS Configuration 9145EMP NID Software User’s ManualCoS Queues Configuration 11310.3.2.2 DSCP ModeOn the User Port Untagged Packet Classifier Mapping

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration11410.3.2.3 AF/EF ModeOn the User Port Untagged Packet Classifier Mapping

CoS Configuration 9145EMP NID Software User’s ManualCoS Queues Configuration 11510.3.3 Queues Configuration on User PortsFrom the Class of Service Qu

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration116 Figure 10-12 Edit Queue Configuration User Ports screen 10.3.4 Queu

CoS Configuration 9145EMP NID Software User’s ManualCoS Queues Configuration 117NOTE: The scheduling algorithm is applied to each set of four queues

Introduction 9145EMP NID Software User’s ManualManagement Access11.0 About the 9145EMP SoftwareThe Multiport 9145E (9145EMP) is a multiport version o

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration11810.3.5 Early Detect Drop ProfilesEarly Detect is a congestion avoidanc

CoS Configuration 9145EMP NID Software User’s ManualCoS Queues Configuration 119Figure 10-14 User Port ED Drop Profile Configuration Figure 10-15 N

9145EMP NID Software User’s Manual CoS ConfigurationCoS Queues Configuration120Figure 10-16 ED Drop Profile Match Criteria (User Port) Canoga Perkin

CoS Configuration 9145EMP NID Software User’s ManualQueue Statistics 12110.4 Queue StatisticsFrom the Class of Service Configuration screen (Figure 1

9145EMP NID Software User’s Manual CoS ConfigurationQueue Statistics122

Service OAM 9145EMP NID Software User’s ManualService OAM12311.0 Introduction Service OAM (SOAM) allows you to detect, isolate, and report connectivi

9145EMP NID Software User’s Manual Service OAMService OAM12411.1.1 SOAM EntitiesTo execute the Service OAM procedures, specific entities must be conf

Service OAM 9145EMP NID Software User’s ManualService OAM 12511.1.2 Logical Positioning of MEPs and MIPsUntagged down MEPs can be configured on each

9145EMP NID Software User’s Manual Service OAMService OAM126Figure 11-1 Positioning of up/down MEPs11.1.3 SOAM ProtocolsSOAM Connectivity Fault Manag

Service OAM 9145EMP NID Software User’s ManualService OAM 127length-value (TLV) component). The network will drop frames above a certain unsupported M

9145EMP NID Software User’s Manual IntroductionThree Levels of Security2username or password is not valid, the RADIUS server sends a message to the 91

9145EMP NID Software User’s Manual Service OAMService OAM128Sender ID TLVs may be included, based on configuration, in CCM, LBM, and LTM packets. The

Service OAM 9145EMP NID Software User’s ManualService OAM 129Figure 11-2 Typical Service OAM deployment and applications 11.1.6 Typical Configuratio

9145EMP NID Software User’s Manual Service OAMService OAM1302. Configure the MD entities first. Up to eight MDs can be configured in a 9145EMP NID, us

Service OAM 9145EMP NID Software User’s ManualSOAM Configuration 131.Figure 11-3 SOAM menu hierarchy11.2 SOAM ConfigurationUse the following steps to

9145EMP NID Software User’s Manual Service OAMSOAM Configuration132Figure 11-4 Main Menu Figure 11-5 Service OAM Main Menu Canoga Perkins Corp.

Service OAM 9145EMP NID Software User’s ManualSOAM Configuration 133 Figure 11-6 SOAM Configuration NOTE: You can perform system-level configuration b

9145EMP NID Software User’s Manual Service OAMSOAM Configuration134Figure 11-7 SOAM System Level Configuration screen7. If you chose Locally Assigned

Service OAM 9145EMP NID Software User’s ManualSOAM Configuration 13512. To change the Port ID TLV Type for the User port, type 7 and press Enter. The

9145EMP NID Software User’s Manual Service OAMMaintenance Domains13611.3 Maintenance Domains Maintenance Domains (MDs) are applicable to 802.1ag proc

Service OAM 9145EMP NID Software User’s ManualMaintenance Domains 1374. In the Name field, type the name of the new domain and press Enter. (You can a

Introduction 9145EMP NID Software User’s ManualFeature Access Level Configuration 3If the file 9145EMP.cap is not downloaded to the 9145EMP, then the

9145EMP NID Software User’s Manual Service OAMMaintenance Domains13811.3.3 Delete a Maintenance DomainWhen you delete a Maintenance Domain, all MAs a

Service OAM 9145EMP NID Software User’s ManualMaintenance Associations 13911.4 Maintenance Associations Maintenance Associations (MAs) are applicable

9145EMP NID Software User’s Manual Service OAMMaintenance Associations1404. Type a name and press Enter. The VLAN Tag Type field is highlighted.5. Se

Service OAM 9145EMP NID Software User’s ManualMaintenance Associations 14110. To modify an attribute value, type the number of the attribute and press

9145EMP NID Software User’s Manual Service OAMMaintenance Associations142NOTE: No more than two MEPs at 100msec are supported. Typically, these MEPs a

Service OAM 9145EMP NID Software User’s ManualMaintenance Associations 143Figure 11-14 Maintenance Association Attributes screen Canoga Perkins Corp.

9145EMP NID Software User’s Manual Service OAMMaintenance Entity Groups14411.5 Maintenance Entity GroupsMaintenance Entity Groups (MEGs) are specific

Service OAM 9145EMP NID Software User’s ManualMaintenance Entity Groups 1455. Select a VLAN Tag Type (NONE, C-Tag, or S-Tag). • None means that the fr

9145EMP NID Software User’s Manual Service OAMMaintenance Entity Groups14611.5.3 Delete a Maintenance Entity GroupWhen you delete a Maintenance Entit

Service OAM 9145EMP NID Software User’s ManualMaintenance Entity Groups 147• To remove a peer MEP, type 2 and press Enter. You are prompted for the ME

9145EMP NID Software User’s Manual IntroductionFeature Access Level Configuration4

9145EMP NID Software User’s Manual Service OAMMaintenance End Points14811.6 Maintenance End PointsA Maintenance Association End Point (MEP) is an act

Service OAM 9145EMP NID Software User’s ManualMaintenance End Points 1493. Type an MA ID or MEG ID and press Enter. (To view a list of MA/MEGs, press

9145EMP NID Software User’s Manual Service OAMMaintenance End Points150Figure 11-19 Create a New Maintenance End Point screen (Y.1731)11.6.3 Delete a

Service OAM 9145EMP NID Software User’s ManualMaintenance End Points 1515. To change CCM Transmit Status, type 2 and press Enter. Select Enabled or Di

9145EMP NID Software User’s Manual Service OAMMaintenance End Points152Figure 11-20 Maintenance End Point Attributes screen (802.1ag)Figure 11-21 Main

Service OAM 9145EMP NID Software User’s ManualMaintenance End Points 15311.6.5 Interoperability between a Y.1731 MEP and 802.1ag MEPsIn general, an 8

9145EMP NID Software User’s Manual Service OAMMaintenance End Points15411.6.6 View the Continuity Check Database for a Maintenance End Point A MEP pe

Service OAM 9145EMP NID Software User’s ManualMaintenance End Points 155Figure 11-23 CCM Connectivity Monitoring screenIn the example shown in Figure

9145EMP NID Software User’s Manual Service OAMMaintenance End Points156.Figure 11-24 CCM Connectivity Monitoring Details screen Canoga Perkins Corp.

Service OAM 9145EMP NID Software User’s ManualMaintenance End Points 15711.6.6 Linktrace ProceduresA Linktrace Message (LTM) is initiated by a MEP to

Getting Started 9145EMP NID Software User’s Manual52.0 Configuring Terminal ManagementWhen you use the EIA-232 Serial Port for VT-100 sessions, Canog

9145EMP NID Software User’s Manual Service OAMMaintenance End Points158Figure 11-25 Linktrace Request screenFigure 11-26 Linktrace Monitoring screen C

Service OAM 9145EMP NID Software User’s ManualMaintenance End Points 159Figure 11-27 SOAM Linktrace Report screen11.6.7 Loopback ProceduresA loopback

9145EMP NID Software User’s Manual Service OAMMaintenance End Points160Sweep loopback allows you to initiate a procedure for which the size of a loopb

Service OAM 9145EMP NID Software User’s ManualMaintenance End Points 161Figure 11-28 Unicast Loopback Monitoring screenFigure 11-29 Sweep Loopback Mon

9145EMP NID Software User’s Manual Service OAMMaintenance End Points162Figure 11-30 Multicast Loopback Monitoring screenFigure 11-31 Loopback Request

Service OAM 9145EMP NID Software User’s ManualMaintenance Intermediate Points 16311.6.7.2 Monitoring a Loopback Request1. To stop current Loopback pro

9145EMP NID Software User’s Manual Service OAMMaintenance Intermediate Points16411.7.2 Create a Maintenance Intermediate Point1. On the Maintenance I

Service OAM 9145EMP NID Software User’s ManualMaintenance Intermediate Points 165Figure 11-34 Create a New Maintenance Intermediate Point screen (Y.17

9145EMP NID Software User’s Manual Service OAMMaintenance Intermediate Points1665. For 802.1ag, to view the VLAN list for that MIP, type 2 and press E

Service OAM 9145EMP NID Software User’s ManualConfiguration Error List 167Figure 11-36 Maintenance Intermediate Point Attributes screen (Y.1731)11.8

9145EMP NID Software User’s Manual Getting StartedSetting Up SNMP Network Management62.1 Setting Up SNMP Network ManagementThe 9145EMP communicates w

9145EMP NID Software User’s Manual Service OAMConfigure and View SOAM Statistics1683. Press Esc to return to the SOAM Configuration screen. Figure 11-

Service OAM 9145EMP NID Software User’s ManualConfigure and View SOAM Statistics 169Figure 11-38 SOAM Statistics screenFigure 11-39 SOAM Statistics sc

9145EMP NID Software User’s Manual Service OAMConfigure and View SOAM Statistics17011.9.1 MEP Statistics1. To display statistics for all MEPs, type 1

Service OAM 9145EMP NID Software User’s ManualConfigure and View SOAM Statistics 171Figure 11-41 Maintenance End Point Statistics screen11.8.2 MIP St

9145EMP NID Software User’s Manual Service OAMConfigure and View SOAM Statistics172 Figure 11-42 Maintenance Intermediate Point Statistics screenFigur

Service OAM 9145EMP NID Software User’s ManualConfigure and View SOAM Statistics 17311.8.3 Statistics Display ConfirmationThe 9145EMP NID allows you

9145EMP NID Software User’s Manual Service OAMConfigure and View SOAM Statistics17411.8.3.2 MIP Statistics1. For MIP statistics, on the SOAM Statisti

Service OAM 9145EMP NID Software User’s ManualAIS Configuration 17511.9 AIS ConfigurationNOTE: AIS applies to Y.1731 procedures only.Configuring Alar

9145EMP NID Software User’s Manual Service OAMAIS Configuration176Figure 11-46 SOAM AIS Configuration screenFigure 11-47 AIS Server Configuration scre

VLAN Multiplexing 9145EMP NID Software User’s ManualVLAN Multiplexing17712.0 Introduction The 9145EMP supports VLAN multiplexing of C-VLANs into S-VL

Getting Started 9145EMP NID Software User’s ManualLogin 7Figure 2-1 Screen Format2.3 LoginThe first screen is the Login screen (Figure 2-2). Type yo

9145EMP NID Software User’s Manual VLAN MultiplexingVLAN Multiplexing178• If a user port has All-to-One Bundling configured on it, no other VLAN multi

VLAN Multiplexing 9145EMP NID Software User’s ManualVLAN Multiplexing 179• Number of transmitted frames and bytes on the Network Port• Number of recei

9145EMP NID Software User’s Manual VLAN MultiplexingVLAN Multiplexing180Figure 12-1 VLAN Multiplexing menu hierarchy VLAN ConfigurationMenuMain VLAN M

VLAN Multiplexing 9145EMP NID Software User’s ManualVLAN Multiplexing Configuration 18112.2 VLAN Multiplexing ConfigurationUse the following steps to

9145EMP NID Software User’s Manual VLAN MultiplexingVLAN Multiplexing Configuration182Figure 12-3 VLAN Multiplexing Record List screen12.2.1 Create a

VLAN Multiplexing 9145EMP NID Software User’s ManualVLAN Multiplexing Configuration 18310. To accept the new VLAN Multiplexing Record settings, type A

9145EMP NID Software User’s Manual VLAN MultiplexingVLAN Multiplexing Configuration1843. To change the Administrative State, type 1 and press Enter. P

VLAN Multiplexing 9145EMP NID Software User’s ManualVLAN Multiplexing Configuration 185Figure 12-6 VLAN Multiplexing Record C-VLAN List screen12.2.4

9145EMP NID Software User’s Manual VLAN MultiplexingVLAN Multiplexing Configuration186.Figure 12-7 VLAN Multiplexing Record Statistics (Current) scre

VLAN Multiplexing 9145EMP NID Software User’s ManualVLAN Multiplexing Configuration 187Figure 12-9 C-VLAN Level Statistics screen Canoga Perkins Corp.

NOTICECanoga Perkins has prepared this user’s manual for use by customers and Canoga Perkins personnel as a guide for the proper installation, operati

9145EMP NID Software User’s Manual Getting StartedMain Menu8Figure 2-2 Login screenWhen you successfully log in, the Main Menu (Figure 2-3) opens. Us

9145EMP NID Software User’s Manual VLAN MultiplexingVLAN Multiplexing Configuration188

CANOGA PERKINS CORPORATION20600 Prairie StreetChatsworth, California 913116008 USAPhone: (818) 7186300 FAX: (818) 7186312Web Site: www.canoga.c

Getting Started 9145EMP NID Software User’s ManualMain Menu 9Figure 2-3 Main Menu 7. Software Upgrade The Software Upgrade screen is used to download

9145EMP NID Software User’s Manual Getting StartedSupported MIBs102.5 Supported MIBsThis section lists all supported MIBs including Standard MIBs and

System Configuration 9145EMP NID Software User’s Manual113.0 System Configuration MenuThe System Configuration menu (Figure 3-1) allows you to access

9145EMP NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration123.1 IP/SNMP Agent ConfigurationThe IP/SNMP Agent Configuration sc

System Configuration 9145EMP NID Software User’s ManualIP/SNMP Agent Configuration 134. Manager S-VLAN ID If Manager VLAN Tagging is set to S-Tagged o

9145EMP NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration149. Reply to Broadcast Ping Enables or disables the 9145EMP reply

System Configuration 9145EMP NID Software User’s ManualIP/SNMP Agent Configuration 154. Auxiliary C-VLAN ID on Network ports Sets the C-VLAN ID value

9145EMP NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration163.1.3 Host TableOn the IP/SNMP Agent Configuration screen (Figure

System Configuration 9145EMP NID Software User’s ManualIP/SNMP Agent Configuration 176. To change the SNMP Protocol parameters, type 4 and press Enter

9145E NID Software User’s ManualThe World Leader in Fiber Optic Communications Systems iPreface ...

9145EMP NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration183.1.4 Trap TableOn the IP/SNMP Agent Configuration screen (Figure

System Configuration 9145EMP NID Software User’s ManualIP/SNMP Agent Configuration 19NOTE: Each Notification Type has a different configuration proced

9145EMP NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration20Figure 3-10 Edit Trap/Notification Type screen 4. Select the Noti

System Configuration 9145EMP NID Software User’s ManualIP/SNMP Agent Configuration 21Figure 3-11 V1-Trap or V2c-Trap Notification Type Parameter• If

9145EMP NID Software User’s Manual System ConfigurationIP/SNMP Agent Configuration22Figure 3-12 V2c-Inform Notification Type ParameterFigure 3-13 V3

System Configuration 9145EMP NID Software User’s ManualIP/SNMP Agent Configuration 234. If you select V3-Inform (Figure 3-15):a. Type the Security Na

9145EMP NID Software User’s Manual System ConfigurationTrap Configuration243.1.4.2 Delete a Trap Table Entry1. To delete a Managing Host IP address, f

System Configuration 9145EMP NID Software User’s ManualTrap Configuration 25The System Log contains the log of all enabled Trap events. 1. To configur

9145EMP NID Software User’s Manual System ConfigurationSecurity Configuration26NOTE: The setting of the Master Trap Control overrides all other trap s

System Configuration 9145EMP NID Software User’s ManualSecurity Configuration 274. Minimum Punctuation Characters The minimum number of punctuation ch

9145E NID Software User’s Manualii The World Leader in Fiber Optic Communications Systems3 System Configuration ...

9145EMP NID Software User’s Manual System ConfigurationSecurity Configuration283.3.2 Lockout/Logout ConfigurationSelect the Lockout/Logout Configurat

System Configuration 9145EMP NID Software User’s ManualAccount Configuration 293.4 Account ConfigurationUse the Account Configuration screen to add n

9145EMP NID Software User’s Manual System ConfigurationAccount Configuration303.4.1 Three Levels of SecurityA three-level security system on the 9145

System Configuration 9145EMP NID Software User’s ManualAccount Configuration 31Figure 3-18 Edit User Account screenUsername The name of the new acco

9145EMP NID Software User’s Manual System ConfigurationAccount Configuration328. Allow UI Logout Of User Gives Supervisors the ability to log users o

System Configuration 9145EMP NID Software User’s ManualSystem Information 333.5 System InformationThe System Information screen is used to add or edi

9145EMP NID Software User’s Manual System ConfigurationRADIUS Client344. Customer Maximum of 25 characters.5. Information Two lines, maximum of 40 c

System Configuration 9145EMP NID Software User’s ManualRADIUS Client 35server with 20 have higher priority simply by changing its priority to 5; no ne

9145EMP NID Software User’s Manual System ConfigurationSNTP Client Configuration36Figure 3-20 RADIUS Client Configuration screen3.7 SNTP Client Conf

System Configuration 9145EMP NID Software User’s ManualSNTP Client Configuration37Figure 3-21 SNTP Client Configuration screen3. SNTP Client Sync Int

9145E NID Software User’s ManualThe World Leader in Fiber Optic Communications Systems iii5 Port Information ...

9145EMP NID Software User’s Manual System ConfigurationSYSLOG Client Configuration383.8 SYSLOG Client ConfigurationUse the SYSLOG Client Configuratio

System Configuration 9145EMP NID Software User’s ManualHardware Information 393.9 Hardware InformationThe Hardware Information screen displays the mo

9145EMP NID Software User’s Manual System ConfigurationHardware Information40Figure 3-24 Hardware Information screen - 2 of 2 Canoga Perkins Corp.

Diagnostics 9145EMP NID Software User’s Manual414.0 Diagnostic FunctionsFrom the Main Menu (Figure 2-3), select (2) Diagnostics menu. The Diagnostics

9145EMP NID Software User’s Manual DiagnosticsLoopback Setup424.1 Loopback Setup The Loopback Setup screen is used to configure and initiate loopback

Diagnostics 9145EMP NID Software User’s ManualLatency/Jitter Test 434.2 Latency/Jitter TestThe Latency/Jitter Test screen is used to initiate tests t

9145EMP NID Software User’s Manual DiagnosticsLatency/Jitter Test44Far End DSCP Sent This is the programmed DSCP.Far End DSCP Rcvd The DSCP that was r

Diagnostics 9145EMP NID Software User’s ManualLatency/Jitter Test 45used. Any address can be used with the Manager IP since it has access to the Defau

9145EMP NID Software User’s Manual DiagnosticsPING Generation464.3 PING GenerationThe PING Generation screen (also available from the Utility menu) i

Diagnostics 9145EMP NID Software User’s ManualPING Generation 475. To enter the Ping Payload Size, type 5 and press Enter. Type a value between 40 and

9145E NID Software User’s Manualiv The World Leader in Fiber Optic Communications Systems7 Utilities ...

9145EMP NID Software User’s Manual DiagnosticsCable Diagnostics484.4 Cable DiagnosticsThe cable diagnostics function provides UTP cable testing. Its

Port Information 9145EMP NID Software User’s Manual495.0 Port DescriptionThe Port Information screen (Figure 5-1) provides a description and a graphi

9145EMP NID Software User’s Manual Port InformationLink Status505.1 Link Status Link Status informs you of the current link status of the User, Netwo

Port Information 9145EMP NID Software User’s ManualPort Configuration 515.2 Port ConfigurationUse the Port Configuration functions to obtain hardware

9145EMP NID Software User’s Manual Port InformationPort Configuration525.2.1 Hardware Information The Hardware Information screen (Figure 5-4) provid

Port Information 9145EMP NID Software User’s ManualPort Configuration 535.2.2 Functional ConfigurationFrom the Port Configuration screen (Figure 5-3)

9145EMP NID Software User’s Manual Port InformationPort Configuration54 Net Port Settings (for ports 1-2) Sets the duplex for the Network Port and al

Port Information 9145EMP NID Software User’s ManualPort Configuration 553. User Side Test Network Filter When this attribute is enabled, the 9145EMP

9145EMP NID Software User’s Manual Port InformationNetwork-side Configuration565.3 Network-side ConfigurationFrom the Port Information screen (Figure

Port Information 9145EMP NID Software User’s ManualLayer 2 Statistics 575.4 Layer 2 StatisticsTo view Layer 2 statistics, from the Port Information s

9145E NID Software User’s ManualThe World Leader in Fiber Optic Communications Systems vOAM Event Log ...

9145EMP NID Software User’s Manual Port InformationLayer 2 Statistics58Figure 5-9 Layer 2 Error Statistics screenFigure 5-10 Layer 2 Frame Type Stat

Port Information 9145EMP NID Software User’s ManualLayer 2 Statistics 595.4.1 Layer 2 Counter Definitions The following are definitions of the counte

9145EMP NID Software User’s Manual Port InformationLayer 2 Statistics60Fragments The number of frames received on the interface that were not an inte

Port Information 9145EMP NID Software User’s ManualRMON Group 1 Statistics 615.5 RMON Group 1 StatisticsTo view Remote Monitoring Specification (RMON

9145EMP NID Software User’s Manual Port InformationRMON Group 1 Statistics62Pkts 128-255 Reports the total number of packets (including bad packets)

Port Information 9145EMP NID Software User’s ManualRMON Group 1 Statistics 63Figure 5-12 RMON Group 1 Statistics screen (continued) Canoga Perkins Co

9145EMP NID Software User’s Manual Port InformationLink Aggregation645.6 Link AggregationThe 9145EMP supports Link Aggregation (LAG) as a link protec

Port Information 9145EMP NID Software User’s ManualLink Aggregation 655.6.1 LAG ConfigurationTo configure LAG, from the Link Aggregation Main Menu (F

9145EMP NID Software User’s Manual Port InformationLink Aggregation66with the far end, but has only a local significance, the receive direction is ena

Port Information 9145EMP NID Software User’s ManualLink Aggregation 675.6.1.2 LAG Aggregation PortsTo configure aggregation ports, from the LAG Confi

9145E NID Software User’s Manualvi The World Leader in Fiber Optic Communications SystemsScreen Navigation...

9145EMP NID Software User’s Manual Port InformationLink Aggregation68Figure 5-17 LAG Port Debug Information screenTo modify an aggregation port confi

Port Information 9145EMP NID Software User’s ManualLink Aggregation 69Figure 5-18 LAG Port Attributes screenYou can modify the following settings:Agg

9145EMP NID Software User’s Manual Port InformationLink Aggregation70Figure 5-19 LAG Port Partner Attributes screenNOTE: Changing the setting on the

Port Information 9145EMP NID Software User’s ManualLink Aggregation 71Aggregation Indicates that the port is part of an aggregation group. Type 8 and

9145EMP NID Software User’s Manual Port InformationLink Aggregation724. Type 6 to go to the LAG Port Partner Attributes screen (Figure 5-21).5. In the

Port Information 9145EMP NID Software User’s ManualLink Aggregation 735.6.2 LAG StatisticsFrom the Link Aggregation Main Menu (Figure 5-13), type 2 a

9145EMP NID Software User’s Manual Port InformationLink Aggregation745.6.2.1 Aggregation Group StatisticsTo view Aggregation Group statistics, from th

Port Information 9145EMP NID Software User’s ManualLink Aggregation 755.6.2.2 LAG Port StatisticsTo display statistics for all ports, from the LAG Sta

9145EMP NID Software User’s Manual Port InformationLink Aggregation76

System Alarms & Logs 9145EMP NID Software User’s Manual776.0 System AlarmsUse the System Alarms screen to view alarms and faults on the 9145EMP.

9145E NID Software User’s ManualThe World Leader in Fiber Optic Communications Systems viiMaintenance Intermediate Points ...

9145EMP NID Software User’s Manual System Alarms & LogsSystem Log786.1 System LogThe System Log lists all events that occurred since the last pow

System Alarms & Logs 9145EMP NID Software User’s ManualSystem Log796.1.1 Log Display Filter ConfigurationThe 9145EMP has a flexible System Log D

9145EMP NID Software User’s Manual System Alarms & LogsSystem Log80

Utilities 9145EMP NID Software User’s Manual817.0 Utilities MenuUse the Utilities Menu to setup and display basic information. From the Main Menu (Fi

9145EMP NID Software User’s Manual UtilitiesSet Date and Time827.1 Set Date and TimeTo set the correct date and time, type 1 and press Enter. Type th

Utilities 9145EMP NID Software User’s ManualVT100 Baud Rate 837.4 VT100 Baud RateTo change the VT100 baud rate, from the Utilities Menu, type 4 and p

9145EMP NID Software User’s Manual UtilitiesStatic ARP Table847.6 Static ARP TableThe Static ARP table is used to define mapping between IP address a

Utilities 9145EMP NID Software User’s ManualDynamic ARP Table 857.7 Dynamic ARP TableThe Dynamic ARP table lists currently active IP and MAC addresse

9145EMP NID Software User’s Manual UtilitiesLicense Manager867.8 License ManagerNOTE: If you are attempting to enable a disabled license, contact Can

Software Upgrade 9145EMP NID Software User’s ManualSoftware Reset878.0 Flash MemoryCAUTION: Swap Bank and Software Reset or Swap Bank After Download