Canoga-perkins 9145 Network Interface Device User Manual download pdf (Page 30)

9145 Network Interface Device

3-10

Layer 2 Statistics

Displays current Layer two Statistics

RMON Group 1 Statistics

Short for Remote Monitoring Specification (RMON). This screen displays current

RMON statistics.

System Alarms

Displays current conditions for local and remote alarms

System Log

Displays all system events

Utilities

Set-up and display basic information. Below are the sub menus:

Set Date & Time

An accurate date and time in the 9145 assures accuracy for events listed in the

System Log and for traps and alarms sent to the system administrator. You can

choose either manual setting of the date and time or configure automatic updating of

the clock using SNTP. Method you use depends on the 9145’s access SNTP Server

and your need for accuracy.

Reset Configuration to Default

This allows you to set all parameters within the 9145 to be set to factory defaults.

Change Password

This option allows the current account running to change their password.

VT100 Baud Rate

This option changes the baud rate of the RS-232 Serial Port when configured for

VT100 terminal support.

Slip/PPP Baud Rate

This option changes the baud rate the RS-232 Serial Port when configured for SLIP

and PPP support

PING Generation

This is a network trouble-shooting tool used to determine if a destination is reachable

from the 9145.

Static ARP Table

The Static ARP table lets you set or change specific IP and MAC addresses

Dynamic ARP Table

The Dynamic ARP table lists currently assigned IP and MAC addresses for various

9145 ports.

License Manager

Displays additional features enabled in the 9145.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 107 108

No comments

Canoga-perkins 9145 Network Interface Device User Manual Page 30