Canoga-perkins 9145 Network Interface Device User Manual download pdf (Page 44)

9145 Network Interface Device

3-24

Manage Traps

Traps are SNMP messages that are sent to CanogaView or your Management Platform, and

the 9145 System Log. Use the Trap Configuration Menu to view the current configuration and

to enable or disable traps. For a list of events that trigger traps, see Table 3. To set up the

traps, follow these steps:

1. From the System Configuration Menu, type [

2], "Trap Configuration," and press <Enter>.

2. At the Trap Configuration Menu, type the number for a trap and press <Enter>. Pressing

<Space> cycles between Log Only, Both Log and Send and Disabled. Press <Enter> to

select your choice. Defaults are 1) Master Trap Control: Log Only, all others (2-13):

Both Log and Send.

3. To return to the Main Menu, press <Esc>.

These selections do not affect how the Major and Minor events are reported. Table 3

describes Trap functions.

Canoga Perkins Corp. Ethernet Network Inter

ace Device 29-Nov-2006

Model 9145-5 V05.00 F96 9145 D 11:41:34

-----------------------------------TRAP CONFIGURATION---------------------------

1) Master Trap Control Log Only

2) Local User Port Link Traps Both Log And Send

3) Remote User Port Link Traps Both Log And Send

4) Extension Port Link Traps Both Log And Send

5) Remote Fault Received Traps Both Log And Send

6) Link Loss Forwarding Traps Both Log And Send

7) Cold Start Traps Both Log And Send

8) Authentication Traps Both Log And Send

9) Side Band Mgmt Channel Traps Both Log And Send

10) Diagnostics Traps Both Log And Send

11) Configuration Traps Both Log And Send

12) Power Supply Traps Both Log And Send

13) SFP Traps Both Log And Send

Select [1-13]:

------------------------------------Messages------------------------------------

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 107 108

No comments

Canoga-perkins 9145 Network Interface Device User Manual Page 44