Canoga-perkins 9145 Network Interface Device User Manual Page 87

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 86
9145 Network Interface Device
4-7
PING Testing
To verify network connectivity with another IP device such as another 9145, an Ethernet
Switch, or a user host, you can use the 9145 to send a PING to the IP address for that
device. Use the PING Generation Screen to send the PING To set up and send a PING,
follow these steps:
1. From the Diagnostics Menu, type [
3], "PING Generation," and press <Enter>
OR From the Utilities Menu, type [
6], "PING Generation," and press <Enter>
2. Configure the 9145 PING test from the PING Menu.
1. Ping to Address
Destination IP Address
2. Ping from Address
IP address of Local 9145. Selections are Management, Alternate, Auto
Selection
3. Ping Count
Number of PING Packet to send. 0 send a continuous test (press <esc> to
terminate test)
4. Ping VLAN ID
VLAN Tag ID for PING Packets
5. Ping Payload Size <40 – 1954>
Length, in bytes, of the Ping packet payload. 40 to 1954 bytes.
6. Ping DF Bit
Sets if the network can fragment the Ping Packet. Set allows fragmentation,
Clear does not.
3. To start the PING test, type [
7]. The 9145 waits the send the next ping until after the
current PING is received or times out. The 9145 display results for each ping which
includes the destination IP address, Sequence Number, round trip time (in milliseconds)
and the Time to Live (TTL).
Canoga Perkins Corp. Ethernet Network Inter
f
ace Device 29-Nov-2006
Model 9145-5 V05.00 F96 9145 D 12:02:00
-------------------------------PING GENERATION----------------------------------
1) Ping to Address : 0.0.0.0
2) Ping from Address : Auto Selection
3) Ping Count : 0
4) Ping VLAN ID : 0
5) Ping Payload Size (40 - 1954) : 40
6) Ping DF Bit : Clear
7) Start Pinging
Select [1-7]:
------------------------------------Messages------------------------------------
Page view 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 107 108

Comments to this Manuals

No comments